Constructed to facilitate the seamless transition between direct current (DC) and alternating current (AC), this switchgear is engineered with robust features to ensure efficient energy management and protection for solar power systems. It boasts an ingress protection rating of IP65, signifying a high level of protection against dust ingress and water jets from any direction, making it suitable for challenging environmental conditions.<br><br>The unit includes a DC surge protection device (SPD) from Noark, rated at 1000V type 2, designed to shield one photovoltaic (PV) string and one maximum power point tracking (MPPT) input from electrical transients. This feature helps in safeguarding sensitive electronic components from surge-related damage.<br><br>Additionally, the switchgear is equipped with an AC SPD, also from Noark, classified as type 2. This component is essential for protecting the AC side of the system from voltage spikes. The switchgear also incorporates a 10A 3-phase circuit breaker, which provides overcurrent protection to maintain system integrity.<br><br>A residual current device (RCD) type A with a rating of 40A/300mA is integrated into the system, offering additional safety by detecting and interrupting earth leakage currents that could pose a risk of electric shock or fire.<br><br>Embodying the emiter EM-714N_DCAC designation, this switchgear is tailored to deliver efficient energy conversion and protection in solar power installations....
Senetic IE
Constructed to ensure robust protection for AC power systems, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to water jets from any direction. This high level of protection makes it suitable for demanding environments where exposure to particulate matter and moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of the AC Dehn type 2, the switchgear provides defense against transient overvoltages, thereby safeguarding sensitive electrical equipment from the potentially damaging effects of power surges. This feature is particularly beneficial in areas prone to lightning strikes or where power supply fluctuations are common.<br><br>The switchgear is designed to disconnect circuits when it detects overcurrent conditions up to 20A in three-phase systems. This functionality is essential for preventing damage to electrical components and reducing the risk of fire caused by circuit overloads.<br><br>The EM-86_AC model is engineered for seamless integration into electrical installations, offering both safety and durability. Its construction adheres to stringent industry standards, ensuring consistent performance in a variety of commercial and industrial settings....
Senetic IE
Constructed to ensure robust electrical circuit management and safety, the unit features an IP65-rated enclosure, providing a high level of protection against dust ingress and water jets from any direction. It is equipped with a DC surge protection device (SPD) from Dehn, rated at 1000V, which is a Type 2 SPD, designed to safeguard against transient over-voltage. This makes it suitable for photovoltaic (PV) applications where multiple PV strings are involved.<br><br>The product can accommodate up to three PV strings and is compatible with systems that have three maximum power point trackers (MPPTs), enhancing its versatility in various solar energy setups. Additionally, it includes an AC SPD, also from Dehn, which is a Type 2 device. This component is crucial for protecting AC circuits from surge events.<br><br>With a 63A 3-phase capability, the switchgear can handle significant electrical loads, making it suitable for a wide range of commercial and industrial applications where such capacity is required. The em-941_dcac designation indicates its model number for reference in inventory or procurement processes....
Senetic IE
The EM-669N_DCAC switchgear is designed to offer a secure and efficient means of managing and protecting direct current (DC) and alternating current (AC) circuits in solar photovoltaic (PV) systems. With an ingress protection rating of IP65, the unit is well-protected against dust ingress and low-pressure water jets from any direction, ensuring durability and longevity in various environmental conditions.<br><br>Equipped with a Surge Protection Device (SPD) for DC applications, rated at 1000V type 2, the switchgear provides robust protection against transient over-voltage, safeguarding sensitive electronic components. It supports two PV strings and is compatible with systems that have two Maximum Power Point Tracking (MPPT) inputs, enhancing the efficiency of solar energy harvesting.<br><br>Additionally, the switchgear includes an SPD for AC applications, also rated at type 2, which offers similar protective features for the AC side of the installation. The unit comes with a 16A single-phase circuit breaker and a Residual Current Device (RCD) rated at 40A/300mA. This RCD is designed to detect and respond to electrical leakages, significantly reducing the risk of electric shock and fire hazards.<br><br>Overall, the switchgear provides a comprehensive solution for circuit protection and management in solar PV installations....
Senetic IE
Constructed to ensure robust protection and control for AC power circuits, this switchgear is designed with an ingress protection rating of IP66, signifying its dust-tight construction and resistance to powerful water jets. It is equipped with a surge protection device (SPD) of Noark type 2, which is engineered to safeguard electrical equipment from voltage spikes, providing an additional layer of security against power surges.<br><br>The unit features an off overcurrent capability of 100A across three phases, ensuring that it can handle high current demands while maintaining circuit integrity. The frame rating (FR) also stands at 100A, indicating the maximum permissible current that the switchgear can safely carry under specified conditions.<br><br>Additionally, the switchgear includes a phase signal functionality, which allows for monitoring the status of each phase within the electrical system. This feature aids in the prompt detection of phase loss or imbalance, which can be critical in preventing damage to connected equipment.<br><br>The model number EM-807N_AC is associated with this switchgear, which serves as an identifier for this specific configuration and set of features. This model is crafted to provide a high level of performance and safety for AC power distribution systems....
Senetic IE
Constructed to provide robust electrical circuit control and protection, the AC switchgear under discussion is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. This level of protection ensures that the internal components remain safeguarded against environmental factors, making it suitable for a variety of demanding applications.<br><br>The unit is equipped with a surge protection device (SPD) compliant with Noark type 1+2 standards, offering defense against transient overvoltage and surge currents. This feature is critical for protecting connected equipment from the damaging effects of electrical surges caused by lightning strikes or power grid fluctuations.<br><br>With an off overcurrent rating of 20A in a single-phase (1-F) configuration, the switchgear is capable of interrupting power flow to prevent circuit damage due to excessive current conditions. The inclusion of an emiter, specifically the EM-95N_AC model, enhances the switchgear's functionality by facilitating the monitoring and control of electrical circuits.<br><br>The combination of these features makes the switchgear a suitable component for ensuring the safety and operational stability of electrical systems in various industrial and commercial settings....
Senetic IE
Constructed to ensure robust protection for AC power systems, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a Surge Protection Device (SPD) of the Dehn type 2 category, which is engineered to safeguard electrical equipment from voltage spikes, providing an additional layer of security against power surges.<br><br>The unit is equipped with an off overcurrent feature rated at 25A for a three-phase (3-F) system, which is essential for preventing damage due to excessive current flow. This functionality is critical in maintaining the integrity of the electrical system and preventing potential hazards.<br><br>The emiter, identified as EM-99_AC, is an integral component of the switchgear, contributing to its efficient operation. The emiter's role is to facilitate the effective distribution and management of AC power within the system, ensuring that the switchgear performs optimally under various electrical loads and conditions.<br><br>Overall, the switchgear is engineered to provide a high level of electrical protection and management, making it suitable for a wide range of applications where safety and efficiency are paramount....
Senetic IE
<h2 style="text-align: justify;">ER-X-SFP - perfect quality of the EdgeMax series</h2> <h3 style="text-align: justify;">The reliable ER-X-SFP offers a very favourable price to quality ratio. The use of the latest technologies means that the highest possible capacity is enclosed in a small, compact case.</h3> <p style="text-align: justify;">The data transfer speed through Ethernet LAN is 1000 Mbit/s. </p> <p style="text-align: justify;"><a class="galeria" href="https://gfx3.senetic.com/product-description-images/ER_X_SFP_2.jpg" title=""><img alt="" height="330" src="https://gfx3.senetic.com/product-description-images/ER_X_SFP_2.jpg" width="612"/></a></p> <h2 style="text-align: justify;">Functionality</h2> <p style="text-align: justify;">The device is equipped with five Gigabit RJ-45 and one SFP port. It includes a Dual-Core 880 MHz, MIPS1004Kc processor. It is CE, FCC and IC certified. It can be used at temperatures ranging from -10 to 45 degrees Celsius. </p> <p style="text-align: justify;"> </p> <p style="text-align: justify;"><a class="galeria" href="https://gfx3.senetic.com/product-description-images/ER_X_SFP_1.jpg" title=""><img alt="" height="449" src="https://gfx3.senetic.com/product-description-images/ER_X_SFP_1.jpg" width="612"/></a></p> <h2 style="text-align: justify;">A range of capabilities</h2> <p style="text-align: justify;">The device can be powered by an outer power unit. Five RJ-45 ports support 24V passive PoE for AirMax and UniFi devices and the SFP port guarantees a fibre optic connection to backhaul devices. The device can use an existing fibre connection by boosting its range. This is a perfect solution for base station creation.</p> <p style="text-align: justify;"> </p> <p><img alt="" height="360" src="https://gfx3.senetic.com/product-description-images/edgerouter_x_sfp.png" style="display: block; margin-left: auto; margin-right: auto;" width="654"/></p> <h2 style="text-align: justify;">Key features</h2> <ul> <li style="text-align: justify;">5 Ethernet LAN ports (RJ-45)</li> <li style="text-align: justify;">maximum data transfer speed through Ethernet LAN 1000 Mbit/s</li> <li style="text-align: justify;">PoE support</li> <li style="text-align: justify;">SFP port</li> <li style="text-align: justify;">intuitive interface</li> <li style="text-align: justify;">compact size</li> </ul> <p style="text-align: justify;"> </p> <h2 style="text-align: justify;">Comparison</h2> <table border="5" style="height: 314px; width: 524px; margin-left: auto; margin-right: auto;"> <tbody> <tr style="height: 34.4341px;"> <td style="width: 208px; height: 34.4341px; text-align: center;"> </td> <td style="width: 149px; height: 34.4341px; text-align: center;"><strong><img alt="" height="31" src="https://gfx3.senetic.com/product-description-images/edgerouter_x_product_model_small.png" width="88"/></strong></td> <td style="width: 149px; height...
Senetic IE