Constructed to ensure robust protection for AC power systems, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to water jets from any direction. This high level of protection makes it suitable for a variety of challenging environments where exposure to particulate matter and moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 1+2, the switchgear is designed to safeguard electrical equipment from voltage spikes. The inclusion of both Type 1 and Type 2 protection means it can handle both direct and indirect lightning strikes and other transient surges, providing comprehensive defense against a wide range of power disturbances.<br><br>The off overcurrent feature is rated at 20A and is three-phase, ensuring that the switchgear can effectively disconnect circuits in the event of an overcurrent situation, thereby preventing potential damage to the system.<br><br>The emiter, EM-353N_AC, denotes the specific model within the product line, indicating its unique configuration and capabilities as part of the manufacturer's offering....
Senetic IE
Constructed to ensure robust electrical circuit protection and management, the unit features an IP65-rated enclosure, signifying a high level of protection against dust ingress and low-pressure water jets from any direction. It is equipped with a Noark 1000V type 2 Surge Protection Device (SPD) on the direct current (DC) side, designed to safeguard against transient overvoltage, which is essential for systems exposed to lightning strikes or power surges.<br><br>The switchgear accommodates three photovoltaic (PV) strings and is compatible with three Maximum Power Point Tracking (MPPT) inputs, enhancing the efficiency of solar energy systems by optimizing the power output from each PV string. On the alternating current (AC) side, it incorporates a Noark type 2 SPD, providing additional surge protection to maintain system integrity and continuity.<br><br>With a 50A 3-phase capacity, the switchgear can handle significant electrical loads, making it suitable for a wide range of applications that require dependable energy distribution and circuit protection. The inclusion of the emiter EM-421N_DCAC signifies a commitment to maintaining electrical safety and performance standards in demanding environments....
Senetic IE
Constructed to ensure robust protection for photovoltaic systems, the IP65-rated DC switchgear comes equipped with Noark 1000V DC surge arresters of type 1+2. This high-grade switchgear is designed to safeguard against transient overvoltage, providing a critical defense mechanism for both commercial and residential solar installations.<br><br>The unit features four photovoltaic (PV) string inputs and outputs, allowing for the connection of multiple solar panels. Each string is capable of independent operation, enhancing the system's flexibility and efficiency. Additionally, the inclusion of four Maximum Power Point Tracking (MPPT) controllers optimizes the conversion of solar energy, ensuring maximum power extraction under all conditions.<br><br>The enclosure of the switchgear is certified with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction, which makes it suitable for a wide range of environmental conditions. The EM-426N_DC model identifier signifies a specific configuration within the product range, tailored to meet the stringent requirements of advanced solar energy systems. <br><br>This switchgear is designed for straightforward installation and maintenance, providing a secure and organized electrical interface for solar arrays....
Senetic IE
Constructed to ensure robust protection and control for photovoltaic systems, this switchgear is designed with an ingress protection rating of IP65, signifying its ability to resist dust ingress and protect against water jets from any direction. It features a DC side equipped with a Noark 1000V type 2 Surge Protection Device (SPD), tailored to safeguard a single photovoltaic string and one Maximum Power Point Tracking (MPPT) input from power surges.<br><br>On the alternating current (AC) side, the unit includes a Noark type 2 SPD, which is engineered to provide surge protection in AC applications. The AC circuit is rated for 16A and is suitable for three-phase connections. This configuration ensures that both the DC and AC components of the photovoltaic system are shielded from transient overvoltage, thereby enhancing the overall safety and longevity of the system.<br><br>The emiter, em-40n_dcac, denotes the model of this switchgear, which is designed to seamlessly integrate into photovoltaic installations. Its construction adheres to stringent quality standards, ensuring that it performs its protective functions effectively while maintaining compatibility with the designated electrical infrastructure....
Senetic IE
Constructed to facilitate efficient energy conversion, the unit features an IP65-rated enclosure, ensuring robust protection against dust and water ingress, making it suitable for a wide range of environmental conditions. The switchgear is equipped with a DC SPD (Surge Protection Device) from Dehn, rated at 1000V for Type 2 surge protection, which safeguards electrical equipment from voltage spikes. It supports a single photovoltaic (PV) string and one MPPT (Maximum Power Point Tracking) controller, optimizing the conversion of solar energy into electricity.<br><br>Additionally, the system includes an AC SPD, also from Dehn and classified as Type 2, designed to protect alternating current circuits. With a 16A 3-phase capacity, it can handle the demands of various electrical loads. The emiter EM-40_DCAC designation indicates the model and series of the switchgear, reflecting its specific features and capabilities.<br><br>The design and components of this switchgear are selected to ensure seamless integration into solar power systems, contributing to the overall efficiency and safety of electrical installations. Its robust construction and inclusion of surge protection devices make it a supportive component for managing and protecting energy in solar applications....
Senetic IE
Constructed to ensure robust protection and control for photovoltaic systems, this switchgear is designed with an ingress protection rating of IP65, signifying a high level of protection against dust and water. It comes equipped with a DC surge protection device (SPD) from Dehn, rated at 1000V for type 2 applications, which safeguards against transient overvoltage. The unit supports a single photovoltaic string and one maximum power point tracking (MPPT) channel, optimizing the conversion efficiency of the solar array.<br><br>Additionally, the switchgear includes an AC surge protection device, also from Dehn, designed as a type 2 protector to shield the alternating current side from electrical surges. With a 20A capacity across a three-phase framework, it is capable of handling typical residential or commercial energy requirements.<br><br>The emiter EM-41_DCAC model is engineered to provide a secure and efficient electrical interface between the photovoltaic array and the power distribution network. Its construction adheres to stringent safety and performance standards, ensuring a high-quality solution for solar energy applications....
Senetic IE
Crafted to ensure safety and efficiency in electrical circuits, the emiter em-265n_ac is a robust AC switchgear that offers comprehensive protection for a variety of applications. Enclosed in an IP65-rated casing, this switchgear is designed to prevent the ingress of dust and protect against low-pressure water jets from any direction, making it suitable for challenging environmental conditions.<br><br>The unit includes a Surge Protection Device (SPD) of Noark type 2, which is engineered to safeguard electrical equipment from voltage spikes. Its off overcurrent protection is rated at 20A for single-phase applications, ensuring that the circuit is promptly disconnected in the event of excessive current flow to prevent damage to the system.<br><br>Additionally, the switchgear features a Residual Current Device (RCD) of type A with a rated residual operating current of 300mA and a rated current of 40A. This RCD is sensitive to pulsating DC fault currents, providing an extra layer of safety against electric shock and fire hazards caused by earth faults.<br><br>The em-265n_ac switchgear is designed for seamless integration into electrical systems requiring dependable circuit protection and is suitable for both commercial and residential installations....
Senetic IE
Constructed to ensure robust protection for DC electrical systems, this switchgear is equipped with IP65-rated enclosures, offering a high level of protection against dust and water ingress, making it suitable for challenging environmental conditions. The unit includes Dehn 1000V type 2 DC surge arresters, designed to safeguard against transient over-voltage, thereby enhancing the longevity and safety of connected equipment.<br><br>The switchgear supports two photovoltaic (PV) strings, allowing for the direct connection of solar panels. This feature facilitates the efficient distribution of solar-generated electricity while maintaining system integrity. Additionally, the inclusion of two Maximum Power Point Tracking (MPPT) inputs enables optimized energy conversion by ensuring that the solar panels operate at their most efficient power point throughout varying conditions.<br><br>The EM-2_DC emitter integrated within the system plays a crucial role in monitoring and managing the energy flow, contributing to the overall performance and efficiency of the switchgear. This component's precise function helps maintain the stability and reliability of the electrical system it serves....
Senetic IE