Constructed to ensure robust protection and control for AC power circuits, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to water jets from any direction. This level of protection makes it suitable for challenging environments where exposure to particulate matter or moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 2, the device is designed to safeguard electrical equipment from voltage spikes, providing an additional layer of security against power surges that can occur during indirect lightning strikes or switching operations.<br><br>The switchgear includes an off overcurrent feature rated at 40A for three-phase systems, offering a mechanism to interrupt power in the event of an overcurrent situation, thereby protecting the circuit from potential damage.<br><br>Additionally, it incorporates a Residual Current Device (RCD) of type A with a rating of 63A/300mA. This component is sensitive to pulsating DC fault currents, ensuring prompt disconnection of the supply to prevent electric shock or fire caused by earth faults in the connected equipment.<br><br>The model number EM-749N_AC signifies this specific configuration of switchgear, which adheres to established standards for safety and functionality in electrical distribution systems....
Senetic IE
Crafted to ensure safety and efficiency in electrical circuits, the EM-749_AC is a robust AC switchgear that meets the stringent IP65 rating, signifying its dust-tight construction and protection against water jets from any direction. This switchgear is equipped with a Surge Protection Device (SPD) of AC Dehn type 2, designed to shield electrical installations from transient overvoltage, thereby safeguarding connected equipment from potential damage caused by power surges.<br><br>The unit features an off overcurrent protection rated at 40A for three-phase systems, which helps to prevent circuit damage due to excessive current flow. Additionally, it incorporates a Residual Current Device (RCD) of type A with a sensitivity of 63A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC earth leakage currents, providing an essential safety mechanism against electrical shock and fire hazards caused by ground faults.<br><br>The EM-749_AC switchgear is engineered for seamless integration into electrical systems requiring high standards of protection and control. Its robust construction and advanced protective features make it suitable for a wide range of industrial and commercial applications....
Senetic IE
Constructed to ensure robust protection and efficient energy management for solar power systems, the EM-729_DCAC switchgear is an integral component for electrical installations. Encased in an IP65-rated enclosure, this switchgear offers a high level of protection against dust and water ingress, making it suitable for challenging environmental conditions.<br><br>The unit comes equipped with a DC surge protection device (SPD) from Dehn, rated at 1000V and certified as type 1+2, which is designed to safeguard against both direct and indirect lightning strikes and power surges. This feature ensures the longevity and safety of connected photovoltaic (PV) components.<br><br>Accommodating three PV strings and compatible with three Maximum Power Point Tracking (MPPT) inputs, the switchgear allows for optimal energy conversion from multiple solar arrays. This flexibility is essential for maximizing the efficiency of solar installations.<br><br>Additionally, the switchgear includes an AC SPD, also from Dehn, classified as type 1+2. This component provides further protection on the AC side of the installation. With a 50A capacity across three phases, it can handle substantial electrical loads while maintaining system integrity during transient voltage events.<br><br>Overall, this switchgear is engineered to offer advanced electrical protection and management for sophisticated solar energy systems....
Senetic IE
The EM-78N_DCAC switchgear is designed to offer a comprehensive solution for solar photovoltaic (PV) system protection. Encased in an IP65-rated enclosure, it ensures a high level of protection against dust and water ingress, making it suitable for a variety of installation environments. The unit includes a Noark 1000V type 1+2 Surge Protection Device (SPD) on the DC side, which is engineered to safeguard against transient overvoltage events, thereby enhancing the safety and longevity of connected PV systems.<br><br>This switchgear supports a single PV string and one Maximum Power Point Tracking (MPPT) input, optimizing the efficiency of solar energy conversion. Additionally, it features an AC side equipped with a Noark type 1+2 SPD, capable of handling up to 10A in a 3-phase configuration. This SPD component on the AC side further contributes to the overall protective measures by mitigating surge events that could potentially damage electrical equipment.<br><br>The integration of both DC and AC surge protection within the same unit streamlines installation and provides a robust defense against voltage transients for solar energy systems. The EM-78N_DCAC switchgear is engineered to maintain the integrity of electrical circuits in solar applications, ensuring enhanced protection for both equipment and operations....
Senetic IE
Constructed to ensure robust electrical circuit protection and control, this AC switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a surge protection device (SPD) of Noark type 2, which is engineered to safeguard electrical systems from transient overvoltage events, thereby extending the lifespan of connected equipment.<br><br>The switchgear features an off overcurrent capability of 16A for three-phase systems, providing a safeguard against excessive current that could potentially cause damage to the circuit or connected devices. Additionally, it is equipped with a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC fault currents, enhancing the safety of the electrical installation by preventing electric shock and fire hazards.<br><br>For monitoring purposes, the unit includes a phase signal feature, allowing for the verification of phase presence and aiding in the maintenance and troubleshooting of the electrical system. The model number EM-803N_AC is associated with this switchgear, indicating its specific design and capabilities within the manufacturer's product line....
Senetic IE
Constructed to ensure robust protection and control for AC power circuits, this switchgear is designed with an ingress protection rating of IP66, signifying its dust-tight construction and resistance to powerful water jets. It is equipped with a surge protection device (SPD) of Noark type 2, which is engineered to safeguard electrical equipment from voltage spikes, providing an additional layer of security against power surges.<br><br>The unit features an off overcurrent capability of 100A across three phases, ensuring that it can handle high current demands while maintaining circuit integrity. The frame rating (FR) also stands at 100A, indicating the maximum permissible current that the switchgear can safely carry under specified conditions.<br><br>Additionally, the switchgear includes a phase signal functionality, which allows for monitoring the status of each phase within the electrical system. This feature aids in the prompt detection of phase loss or imbalance, which can be critical in preventing damage to connected equipment.<br><br>The model number EM-807N_AC is associated with this switchgear, which serves as an identifier for this specific configuration and set of features. This model is crafted to provide a high level of performance and safety for AC power distribution systems....
Senetic IE
Constructed to ensure robust electrical circuit protection, the unit features an IP65-rated enclosure, providing a high level of protection against dust and water ingress, making it suitable for challenging environmental conditions. The switchgear is equipped with a Noark 1000V type 2 Surge Protection Device (SPD) on the direct current (DC) side, designed to safeguard against transient over-voltage, thus enhancing the safety and longevity of connected photovoltaic (PV) systems.<br><br>The device accommodates two PV strings and is compatible with systems that have two Maximum Power Point Tracking (MPPT) inputs, allowing for optimized energy conversion efficiency from solar panels. On the alternating current (AC) side, it includes a Noark type 1+2 SPD, which provides comprehensive protection by addressing both direct and indirect lightning strikes and power surges.<br><br>Additionally, the switchgear is fitted with a 10A 3-phase circuit breaker, which ensures over-current protection, contributing to the overall safety and maintenance of the electrical system. The emiter EM-841N_DCAC model is engineered to facilitate secure and efficient electrical distribution for solar energy applications....
Senetic IE
Constructed to ensure robust electrical circuit control and protection, the unit features an IP65-rated enclosure, providing a high level of protection against dust and water ingress, making it suitable for challenging environmental conditions. The switchgear is equipped with a DC surge protection device (SPD) from Dehn, rated at 1000V for type 2 applications, ensuring safeguarding against transient over-voltage events for up to two photovoltaic (PV) strings. Additionally, it supports two maximum power point tracking (MPPT) inputs, optimizing the conversion efficiency for solar installations.<br><br>On the alternating current (AC) side, the switchgear includes an SPD from Dehn that meets the requirements for both type 1 and type 2 surge protection, offering comprehensive defense against surges from direct and indirect lightning strikes as well as switching operations. The AC circuit is rated for 10A and is designed to handle three-phase connections, providing compatibility with a wide range of electrical systems.<br><br>The emiter, em-841_dcac, is engineered to deliver consistent performance in solar energy applications, ensuring the safety and efficiency of the electrical infrastructure it serves....
Senetic IE