Constructed to ensure robust protection and control for AC power circuits, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to water jets from any direction. This level of protection makes it suitable for challenging environments where exposure to particulate matter or moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 2, the device is designed to safeguard electrical equipment from voltage spikes, providing an additional layer of security against power surges that can occur during indirect lightning strikes or switching operations.<br><br>The switchgear includes an off overcurrent feature rated at 40A for three-phase systems, offering a mechanism to interrupt power in the event of an overcurrent situation, thereby protecting the circuit from potential damage.<br><br>Additionally, it incorporates a Residual Current Device (RCD) of type A with a rating of 63A/300mA. This component is sensitive to pulsating DC fault currents, ensuring prompt disconnection of the supply to prevent electric shock or fire caused by earth faults in the connected equipment.<br><br>The model number EM-749N_AC signifies this specific configuration of switchgear, which adheres to established standards for safety and functionality in electrical distribution systems....
Senetic IE
Crafted to ensure safety and efficiency in electrical circuits, the EM-749_AC is a robust AC switchgear that meets the stringent IP65 rating, signifying its dust-tight construction and protection against water jets from any direction. This switchgear is equipped with a Surge Protection Device (SPD) of AC Dehn type 2, designed to shield electrical installations from transient overvoltage, thereby safeguarding connected equipment from potential damage caused by power surges.<br><br>The unit features an off overcurrent protection rated at 40A for three-phase systems, which helps to prevent circuit damage due to excessive current flow. Additionally, it incorporates a Residual Current Device (RCD) of type A with a sensitivity of 63A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC earth leakage currents, providing an essential safety mechanism against electrical shock and fire hazards caused by ground faults.<br><br>The EM-749_AC switchgear is engineered for seamless integration into electrical systems requiring high standards of protection and control. Its robust construction and advanced protective features make it suitable for a wide range of industrial and commercial applications....
Senetic IE
The EM-78N_DCAC switchgear is designed to offer a comprehensive solution for solar photovoltaic (PV) system protection. Encased in an IP65-rated enclosure, it ensures a high level of protection against dust and water ingress, making it suitable for a variety of installation environments. The unit includes a Noark 1000V type 1+2 Surge Protection Device (SPD) on the DC side, which is engineered to safeguard against transient overvoltage events, thereby enhancing the safety and longevity of connected PV systems.<br><br>This switchgear supports a single PV string and one Maximum Power Point Tracking (MPPT) input, optimizing the efficiency of solar energy conversion. Additionally, it features an AC side equipped with a Noark type 1+2 SPD, capable of handling up to 10A in a 3-phase configuration. This SPD component on the AC side further contributes to the overall protective measures by mitigating surge events that could potentially damage electrical equipment.<br><br>The integration of both DC and AC surge protection within the same unit streamlines installation and provides a robust defense against voltage transients for solar energy systems. The EM-78N_DCAC switchgear is engineered to maintain the integrity of electrical circuits in solar applications, ensuring enhanced protection for both equipment and operations....
Senetic IE
Constructed to ensure robust electrical circuit protection, the unit features an IP65-rated enclosure, providing a high level of protection against dust and water ingress, making it suitable for challenging environmental conditions. The switchgear is equipped with a Noark 1000V type 2 Surge Protection Device (SPD) on the direct current (DC) side, designed to safeguard against transient over-voltage, thus enhancing the safety and longevity of connected photovoltaic (PV) systems.<br><br>The device accommodates two PV strings and is compatible with systems that have two Maximum Power Point Tracking (MPPT) inputs, allowing for optimized energy conversion efficiency from solar panels. On the alternating current (AC) side, it includes a Noark type 1+2 SPD, which provides comprehensive protection by addressing both direct and indirect lightning strikes and power surges.<br><br>Additionally, the switchgear is fitted with a 10A 3-phase circuit breaker, which ensures over-current protection, contributing to the overall safety and maintenance of the electrical system. The emiter EM-841N_DCAC model is engineered to facilitate secure and efficient electrical distribution for solar energy applications....
Senetic IE
Constructed to ensure robust electrical circuit control and protection, the unit features an IP65-rated enclosure, providing a high level of protection against dust and water ingress, making it suitable for challenging environmental conditions. The switchgear is equipped with a DC surge protection device (SPD) from Dehn, rated at 1000V for type 2 applications, ensuring safeguarding against transient over-voltage events for up to two photovoltaic (PV) strings. Additionally, it supports two maximum power point tracking (MPPT) inputs, optimizing the conversion efficiency for solar installations.<br><br>On the alternating current (AC) side, the switchgear includes an SPD from Dehn that meets the requirements for both type 1 and type 2 surge protection, offering comprehensive defense against surges from direct and indirect lightning strikes as well as switching operations. The AC circuit is rated for 10A and is designed to handle three-phase connections, providing compatibility with a wide range of electrical systems.<br><br>The emiter, em-841_dcac, is engineered to deliver consistent performance in solar energy applications, ensuring the safety and efficiency of the electrical infrastructure it serves....
Senetic IE
Constructed to provide secure and efficient electrical circuit control and protection, the IP65-rated AC switchgear is equipped with a Dehn type 2 Surge Protection Device (SPD), ensuring safeguarding against transient overvoltages. The unit is designed to handle off overcurrent scenarios with a 16A 1-F capacity, making it suitable for a variety of industrial and commercial applications where electrical safety is paramount.<br><br>The enclosure of the switchgear boasts an IP65 protection rating, signifying its dust-tight construction and resistance to water ingress, which allows for its use in environments where exposure to particulate matter and moisture is a concern. The inclusion of the Dehn type 2 SPD component within the switchgear provides an additional layer of defense against voltage spikes, contributing to the longevity of connected equipment and reducing the risk of downtime due to electrical disturbances.<br><br>The em-59_ac model is engineered for straightforward installation and maintenance, with features that support ease of use while adhering to safety standards. Its robust design ensures that it can withstand the rigors of demanding operational conditions, making it a suitable choice for managing electrical circuits in various settings....
Senetic IE
Constructed to facilitate the seamless transition between direct current (DC) and alternating current (AC), this switchgear is engineered with robust features to ensure efficient energy management and protection for solar power systems. It boasts an ingress protection rating of IP65, signifying a high level of protection against dust ingress and water jets from any direction, making it suitable for challenging environmental conditions.<br><br>The unit includes a DC surge protection device (SPD) from Noark, rated at 1000V type 2, designed to shield one photovoltaic (PV) string and one maximum power point tracking (MPPT) input from electrical transients. This feature helps in safeguarding sensitive electronic components from surge-related damage.<br><br>Additionally, the switchgear is equipped with an AC SPD, also from Noark, classified as type 2. This component is essential for protecting the AC side of the system from voltage spikes. The switchgear also incorporates a 10A 3-phase circuit breaker, which provides overcurrent protection to maintain system integrity.<br><br>A residual current device (RCD) type A with a rating of 40A/300mA is integrated into the system, offering additional safety by detecting and interrupting earth leakage currents that could pose a risk of electric shock or fire.<br><br>Embodying the emiter EM-714N_DCAC designation, this switchgear is tailored to deliver efficient energy conversion and protection in solar power installations....
Senetic IE
Engineered to ensure the safe and efficient operation of solar energy systems, this switchgear is designed to cater to the needs of a single photovoltaic (PV) string with one maximum power point tracking (MPPT) input. It boasts an ingress protection rating of IP65, signifying a high level of protection against dust ingress and water jets from any direction, making it suitable for challenging environmental conditions.<br><br>The unit comes equipped with a direct current (DC) surge protection device (SPD) from Dehn, rated at 1000V type 2, which is adept at safeguarding the electrical equipment from transient overvoltage events. Additionally, an alternating current (AC) SPD, also from Dehn type 2, is integrated into the system to provide similar protection on the AC side.<br><br>For circuit protection and safety, the switchgear includes a 10A 3-phase circuit breaker that ensures the system operates within safe current limits. It also features a residual current device (RCD) type A with a rating of 40A/300mA, which offers protection against earth fault currents that could pose a risk to both equipment and personnel.<br><br>The emiter EM-714_DCAC model encapsulates these features in a robust design tailored for solar energy applications....
Senetic IE