Constructed to ensure robust protection and control for AC power circuits, this switchgear is designed with an ingress protection rating of IP66, signifying its dust-tight construction and resistance to powerful water jets. It is equipped with a surge protection device (SPD) of Noark type 2, which is engineered to safeguard electrical equipment from voltage spikes, providing an additional layer of security against power surges.<br><br>The unit features an off overcurrent capability of 100A across three phases, ensuring that it can handle high current demands while maintaining circuit integrity. The frame rating (FR) also stands at 100A, indicating the maximum permissible current that the switchgear can safely carry under specified conditions.<br><br>Additionally, the switchgear includes a phase signal functionality, which allows for monitoring the status of each phase within the electrical system. This feature aids in the prompt detection of phase loss or imbalance, which can be critical in preventing damage to connected equipment.<br><br>The model number EM-807N_AC is associated with this switchgear, which serves as an identifier for this specific configuration and set of features. This model is crafted to provide a high level of performance and safety for AC power distribution systems....
Senetic IE
APC Easy Rack PDU, Switched, 0U, 1 Phase, 7.4kW, 230V, 32A, 20 x C13 and 4 x C19 outlets, IEC60309 2P+E inlet. PDU types: Metered, Switched, Rack capacity: 0U, Type: Single-phase. AC outlets quantity: 24 AC outlet(s), AC outlet types: C13 coupler, C19 coupler, Power plug: IEC 60309. Nominal input voltage: 230 V, Maximum current: 32 A, AC input frequency: 50 - 60 Hz. Compliance certificates: RoHS, Certification: CE, EAC, TUV, REACH. Width: 55 mm, Depth: 62 mm, Height: 1738 mm...
Senetic IE
Constructed to ensure robust protection for AC power systems, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a Surge Protection Device (SPD) of the Dehn type 2 category, offering defense against transient overvoltages and ensuring the safety of connected electrical equipment.<br><br>The unit is equipped with an off overcurrent feature rated at 50A for a three-phase system, providing a safeguard against current surges that could potentially cause damage or pose a fire risk. This feature is essential for maintaining the integrity of the electrical system and preventing disruptions due to overcurrent incidents.<br><br>The switchgear is compatible with the emiter EM-212_AC series, ensuring seamless integration with existing components from the same line. Its robust construction and protective features make it suitable for a wide range of applications where electrical system security is paramount. The device's specifications and capabilities are tailored to meet the demands of environments requiring stringent control over electrical supply and protection....
Senetic IE
Crafted to ensure safety and efficiency in electrical circuits, the emiter em-265n_ac is a robust AC switchgear that offers comprehensive protection for a variety of applications. Enclosed in an IP65-rated casing, this switchgear is designed to prevent the ingress of dust and protect against low-pressure water jets from any direction, making it suitable for challenging environmental conditions.<br><br>The unit includes a Surge Protection Device (SPD) of Noark type 2, which is engineered to safeguard electrical equipment from voltage spikes. Its off overcurrent protection is rated at 20A for single-phase applications, ensuring that the circuit is promptly disconnected in the event of excessive current flow to prevent damage to the system.<br><br>Additionally, the switchgear features a Residual Current Device (RCD) of type A with a rated residual operating current of 300mA and a rated current of 40A. This RCD is sensitive to pulsating DC fault currents, providing an extra layer of safety against electric shock and fire hazards caused by earth faults.<br><br>The em-265n_ac switchgear is designed for seamless integration into electrical systems requiring dependable circuit protection and is suitable for both commercial and residential installations....
Senetic IE
Constructed to ensure robust protection for AC power distribution systems, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a surge protection device (SPD) of AC Dehn type 2, which is engineered to safeguard electrical equipment from voltage spikes, thereby extending the lifespan of connected devices.<br><br>The switchgear features an off overcurrent capability of 16A for three-phase (3-F) systems, providing a safeguard against excessive current that could cause damage to the circuit or connected equipment. Additionally, it is equipped with a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC fault currents, offering enhanced protection against electric shock and fire hazards caused by earth faults.<br><br>The unit is identified by the emiter code EM-268_AC, which is indicative of its specifications and manufacturer's product line. This switchgear is suitable for a variety of applications where safety and durability are paramount....
Senetic IE
Engineered to ensure the safe and efficient management of direct current (DC) and alternating current (AC) power in solar photovoltaic (PV) systems, this switchgear is a robust solution for energy conversion and circuit protection. It features an ingress protection rating of IP65, signifying a dust-tight enclosure with protection against water jets, making it suitable for challenging environmental conditions.<br><br>The unit includes a surge protection device (SPD) for DC applications, a Dehn 1000V type 2, designed to safeguard electrical equipment from voltage spikes. It supports two PV strings and is compatible with two maximum power point tracking (MPPT) controllers, enhancing the energy harvesting efficiency of solar installations.<br><br>Additionally, the switchgear is equipped with an AC Dehn type 2 SPD, providing similar surge protection for AC circuits. It is rated for 25A in a 3-phase configuration and includes a residual current device (RCD) type A with a 40A current rating and a 100mA trip sensitivity, offering critical protection against earth leakage currents.<br><br>The emiter, em-382_dcac, is built to maintain system integrity and protect against electrical anomalies, contributing to the longevity and safety of solar PV installations....
Senetic IE
The EM-78N_DCAC switchgear is designed to offer a comprehensive solution for solar photovoltaic (PV) system protection. Encased in an IP65-rated enclosure, it ensures a high level of protection against dust and water ingress, making it suitable for a variety of installation environments. The unit includes a Noark 1000V type 1+2 Surge Protection Device (SPD) on the DC side, which is engineered to safeguard against transient overvoltage events, thereby enhancing the safety and longevity of connected PV systems.<br><br>This switchgear supports a single PV string and one Maximum Power Point Tracking (MPPT) input, optimizing the efficiency of solar energy conversion. Additionally, it features an AC side equipped with a Noark type 1+2 SPD, capable of handling up to 10A in a 3-phase configuration. This SPD component on the AC side further contributes to the overall protective measures by mitigating surge events that could potentially damage electrical equipment.<br><br>The integration of both DC and AC surge protection within the same unit streamlines installation and provides a robust defense against voltage transients for solar energy systems. The EM-78N_DCAC switchgear is engineered to maintain the integrity of electrical circuits in solar applications, ensuring enhanced protection for both equipment and operations....
Senetic IE
Constructed to ensure robust protection and control for alternating current (AC) applications, the unit features an ingress protection rating of IP66, signifying its dust-tight design and resistance against powerful water jets. It is equipped with a surge protection device (SPD) of AC Dehn type 2, offering safeguarding against transient overvoltages.<br><br>The switchgear is designed to handle off overcurrent scenarios with a specification of 16A for three-phase systems, ensuring a secure interruption of excessive current flow to prevent damage to the circuit. Additionally, it incorporates a residual current device (RCD) of type A with a rating of 40A/300mA. This RCD is sensitive to pulsating direct current which could indicate a fault in the electrical system, providing an essential safety mechanism against electric shock and fire hazards.<br><br>A phase signal feature is included to facilitate the monitoring of electrical phase presence, contributing to the maintenance of system integrity. The emiter EM-803_AC model encapsulates these functionalities, making it suitable for a wide range of industrial and commercial electrical installations where safety and durability are paramount....
Senetic IE