Constructed to ensure robust electrical circuit protection and control, this AC switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It features a Surge Protection Device (SPD) of Noark type 1+2, offering defense against transient overvoltage and ensuring the safety of electrical installations from lightning strikes and power surges.<br><br>The unit is equipped with an overcurrent protection mechanism rated at 40A for three-phase systems, effectively safeguarding electrical circuits from excessive current that could cause damage to equipment or pose a fire risk. Additionally, it incorporates a Residual Current Device (RCD) of type A with a rating of 63A/300mA. This RCD is sensitive to pulsating DC fault currents, providing enhanced protection against electric shock and further reducing the risk of electrical fires.<br><br>The emiter EM-909N_AC model is engineered for seamless integration into electrical systems requiring dependable circuit control and protection. Its robust design and advanced protective features make it suitable for a wide range of applications where safety and circuit integrity are paramount....
Senetic IE
Constructed to ensure robust protection and control for AC power circuits, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to water jets from any direction. This level of protection makes it suitable for challenging environments where exposure to particulate matter or moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 2, the device is designed to safeguard electrical equipment from voltage spikes, providing an additional layer of security against power surges that can occur during indirect lightning strikes or switching operations.<br><br>The switchgear includes an off overcurrent feature rated at 40A for three-phase systems, offering a mechanism to interrupt power in the event of an overcurrent situation, thereby protecting the circuit from potential damage.<br><br>Additionally, it incorporates a Residual Current Device (RCD) of type A with a rating of 63A/300mA. This component is sensitive to pulsating DC fault currents, ensuring prompt disconnection of the supply to prevent electric shock or fire caused by earth faults in the connected equipment.<br><br>The model number EM-749N_AC signifies this specific configuration of switchgear, which adheres to established standards for safety and functionality in electrical distribution systems....
Senetic IE
Constructed to ensure robust electrical circuit protection and control, this AC switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a surge protection device (SPD) of Noark type 2, which is engineered to safeguard electrical systems from transient overvoltage events, thereby extending the lifespan of connected equipment.<br><br>The switchgear features an off overcurrent capability of 16A for three-phase systems, providing a safeguard against excessive current that could potentially cause damage to the circuit or connected devices. Additionally, it is equipped with a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC fault currents, enhancing the safety of the electrical installation by preventing electric shock and fire hazards.<br><br>For monitoring purposes, the unit includes a phase signal feature, allowing for the verification of phase presence and aiding in the maintenance and troubleshooting of the electrical system. The model number EM-803N_AC is associated with this switchgear, indicating its specific design and capabilities within the manufacturer's product line....
Senetic IE
Constructed to facilitate the seamless transition between direct current (DC) and alternating current (AC), this switchgear is engineered with robust features to ensure efficient energy management and protection for solar power systems. It boasts an ingress protection rating of IP65, signifying a high level of protection against dust ingress and water jets from any direction, making it suitable for challenging environmental conditions.<br><br>The unit includes a DC surge protection device (SPD) from Noark, rated at 1000V type 2, designed to shield one photovoltaic (PV) string and one maximum power point tracking (MPPT) input from electrical transients. This feature helps in safeguarding sensitive electronic components from surge-related damage.<br><br>Additionally, the switchgear is equipped with an AC SPD, also from Noark, classified as type 2. This component is essential for protecting the AC side of the system from voltage spikes. The switchgear also incorporates a 10A 3-phase circuit breaker, which provides overcurrent protection to maintain system integrity.<br><br>A residual current device (RCD) type A with a rating of 40A/300mA is integrated into the system, offering additional safety by detecting and interrupting earth leakage currents that could pose a risk of electric shock or fire.<br><br>Embodying the emiter EM-714N_DCAC designation, this switchgear is tailored to deliver efficient energy conversion and protection in solar power installations....
Senetic IE
The EM-669N_DCAC switchgear is designed to offer a secure and efficient means of managing and protecting direct current (DC) and alternating current (AC) circuits in solar photovoltaic (PV) systems. With an ingress protection rating of IP65, the unit is well-protected against dust ingress and low-pressure water jets from any direction, ensuring durability and longevity in various environmental conditions.<br><br>Equipped with a Surge Protection Device (SPD) for DC applications, rated at 1000V type 2, the switchgear provides robust protection against transient over-voltage, safeguarding sensitive electronic components. It supports two PV strings and is compatible with systems that have two Maximum Power Point Tracking (MPPT) inputs, enhancing the efficiency of solar energy harvesting.<br><br>Additionally, the switchgear includes an SPD for AC applications, also rated at type 2, which offers similar protective features for the AC side of the installation. The unit comes with a 16A single-phase circuit breaker and a Residual Current Device (RCD) rated at 40A/300mA. This RCD is designed to detect and respond to electrical leakages, significantly reducing the risk of electric shock and fire hazards.<br><br>Overall, the switchgear provides a comprehensive solution for circuit protection and management in solar PV installations....
Senetic IE
Constructed to ensure robust electrical circuit protection and management, the unit features an IP65-rated enclosure, providing a high level of protection against dust ingress and water jets from any direction. It is equipped with a Noark 1000V type 2 Surge Protection Device (SPD) on the DC side, designed to safeguard against transient overvoltage, which is essential for systems exposed to lightning strikes or power surges.<br><br>The switchgear accommodates two photovoltaic (PV) strings and is compatible with two Maximum Power Point Tracking (MPPT) inputs, enhancing the efficiency of solar energy systems by optimizing the power output from PV panels. On the alternating current (AC) side, it includes a Noark type 2 SPD, which similarly protects AC circuits from surge events.<br><br>Additionally, the switchgear is fitted with a 20A 3-phase circuit breaker that allows for safe and controlled distribution of electrical power across three-phase electrical systems. It also incorporates a Residual Current Device (RCD) type A with a 40A/300mA rating, which monitors for any imbalance between live conductors and instantly breaks the circuit in the event of earth leakage, thereby preventing electric shock hazards and fire risks.<br><br>The emiter EM-588N_DCAC model ensures enhanced safety and operational efficiency for electrical installations requiring stringent protection measures....
Senetic IE
Constructed to ensure robust protection for AC power distribution systems, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to low-pressure water jets from any direction. This level of protection makes it suitable for challenging environments where exposure to particulate matter and moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of AC Dehn type 2, the device is designed to safeguard electrical equipment from voltage spikes, providing an additional layer of security against power surges that can result from lightning strikes or switching operations.<br><br>The switchgear includes an overcurrent protection feature rated at 50A for three-phase applications, ensuring that the system is safeguarded against excessive currents which could potentially cause damage to the circuit or connected devices.<br><br>Additionally, it incorporates a Residual Current Device (RCD) of type A with a rating of 63A/300mA. This component is critical for detecting and interrupting circuit imbalances that may indicate leakage currents, which could pose a risk of electric shock or fire.<br><br>The model EM-470_AC is engineered to deliver enhanced safety and stability for electrical installations, making it a suitable choice for a wide range of industrial and commercial applications....
Senetic IE
Engineered to ensure seamless energy management and distribution, the EM-528_DCAC switchgear is a robust solution designed to cater to advanced electrical infrastructure needs. Enclosed within an IP65-rated casing, this switchgear offers a high degree of protection against dust and water ingress, making it suitable for challenging environmental conditions.<br><br>The unit comes equipped with a DC surge protection device (SPD) from Dehn, rated at 1000V type 2, which is adept at safeguarding the system from transient overvoltage. It supports two photovoltaic (PV) strings and is compatible with two maximum power point tracking (MPPT) inputs, enhancing the efficiency of solar energy systems.<br><br>On the alternating current (AC) side, the switchgear features an AC SPD, also from Dehn, classified as type 2. This component is essential for protecting electrical equipment from surge events on the AC network. The switchgear includes a 16A 3-phase circuit breaker, ensuring safe and controlled distribution of electricity.<br><br>Additionally, it incorporates a residual current device (RCD) type A with a rating of 40A/300mA. This safety device is designed to interrupt the circuit if it detects a potentially dangerous imbalance between the incoming and outgoing current, thereby providing protection against electric shock and reducing the risk of electrical fires.<br><br>Overall, this switchgear is engineered to offer enhanced safety and efficiency for electrical systems requiring robust energy management solutions....
Senetic IE