Crafted to ensure safety and efficiency in electrical circuits, the unit features an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. This high level of protection makes it suitable for use in environments where exposure to dust and moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 1+2, the switchgear provides robust defense against transient overvoltage, safeguarding electrical equipment from lightning strikes and power surges. The off overcurrent capability is rated at 50A for 3-phase systems, ensuring the switchgear can handle high current scenarios without compromise.<br><br>Additionally, the inclusion of a Residual Current Device (RCD) of type A with a rating of 63A/300mA offers protection against earth fault currents, reducing the risk of electric shock and fire caused by ground faults. The EM-316N_AC model is designed to deliver a combination of protection features that contribute to the safe operation of electrical installations....
Senetic IE
Constructed to ensure robust protection for AC power systems, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to water jets from any direction. This high level of protection makes it suitable for a variety of challenging environments where exposure to particulate matter and moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 1+2, the switchgear is designed to safeguard electrical equipment from voltage spikes. The inclusion of both Type 1 and Type 2 protection means it can handle both direct and indirect lightning strikes and other transient surges, providing comprehensive defense against a wide range of power disturbances.<br><br>The off overcurrent feature is rated at 20A and is three-phase, ensuring that the switchgear can effectively disconnect circuits in the event of an overcurrent situation, thereby preventing potential damage to the system.<br><br>The emiter, EM-353N_AC, denotes the specific model within the product line, indicating its unique configuration and capabilities as part of the manufacturer's offering....
Senetic IE
Crafted with precision, the EM-276_AC is a robust AC switchgear designed to ensure the safety and efficiency of electrical systems. With an ingress protection rating of IP65, this switchgear is well-protected against dust ingress and low-pressure water jets from any direction, making it suitable for a variety of challenging environments.<br><br>The unit is equipped with a Surge Protection Device (SPD) of Dehn type 2, which is engineered to safeguard electrical installations from transient overvoltage, thereby extending the lifespan of connected equipment. The switchgear's off overcurrent capability is rated at 25A for 3-phase (3-F) systems, providing a secure mechanism to disconnect circuits in the event of an overcurrent situation.<br><br>Additionally, the inclusion of a Residual Current Device (RCD) of type A with a rating of 40A/300mA offers added protection by detecting and interrupting earth fault currents, helping to prevent electrical shock and fire hazards.<br><br>The EM-276_AC embodies a harmonious blend of advanced safety features and robust construction, making it a suitable choice for managing electrical circuits in commercial and industrial settings....
Senetic IE
Constructed to ensure robust protection and control for AC power circuits, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to low-pressure water jets from any direction. This characteristic makes it suitable for use in environments where exposure to particulate matter and moisture is a concern.<br><br>Equipped with a surge protection device (SPD) of Noark type 2, the switchgear is designed to safeguard electrical equipment from transient overvoltage events, thereby extending the lifespan of connected devices and reducing the risk of damage due to power surges.<br><br>The switchgear is capable of interrupting overcurrents up to 10A in three-phase (3-F) systems, providing essential protection against excessive current flow that could potentially cause overheating or fires.<br><br>Additionally, it incorporates a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This component is crucial for preventing electric shock and fire hazards by detecting and interrupting circuit imbalances that may not be apparent but pose serious safety risks.<br><br>The model EM-296N_AC from Emitter underscores a commitment to electrical safety and system integrity in demanding applications....
Senetic IE
Constructed to provide robust protection for photovoltaic systems, the IP65-rated DC switchgear is equipped with Noark 1000V DC surge arresters of type 1+2, ensuring safeguarding against transient overvoltage. This unit is designed to handle up to five photovoltaic strings and is compatible with five maximum power point tracking (MPPT) controllers, optimizing the energy conversion efficiency for each PV string.<br><br>The enclosure of the switchgear meets the IP65 standard, signifying a high level of protection against dust ingress and low-pressure water jets from any direction, making it suitable for challenging environmental conditions. The inclusion of Noark 1000V DC surge arresters provides a two-tiered defense mechanism, combining the immediate response of type 1 arresters with the precision protection of type 2 devices.<br><br>Each channel within the switchgear is dedicated to a single PV string, ensuring individualized protection and management. The EM-317N_DC model number identifies this specific configuration of DC switchgear, which adheres to stringent safety and performance standards. Its robust construction and advanced protective features make it a valuable component in maintaining the integrity and performance of solar energy systems....
Senetic IE
Constructed to ensure robust protection and control for AC power circuits, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a surge protection device (SPD) of Noark type 1+2, offering defense against transient overvoltages and ensuring the safety of electrical equipment.<br><br>The switchgear features an off overcurrent capability of 32A across a three-phase system (3-F), effectively safeguarding circuits from excessive current that could cause damage or pose a fire risk. Additionally, it is equipped with a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC fault currents, thereby minimizing the risk of electric shock and preventing electrical fire hazards.<br><br>The product is identified by the emiter code EM-357N_AC, which is unique to this specific model of switchgear, ensuring easy identification and reference for installation and maintenance purposes. Its robust construction and integrated protective features make it suitable for a wide range of industrial and commercial electrical applications....
Senetic IE
Engineered to ensure the safe and efficient management of direct current (DC) and alternating current (AC) power in solar photovoltaic (PV) systems, this switchgear is a robust solution for energy conversion and circuit protection. It features an ingress protection rating of IP65, signifying a dust-tight enclosure with protection against water jets, making it suitable for challenging environmental conditions.<br><br>The unit includes a surge protection device (SPD) for DC applications, a Dehn 1000V type 2, designed to safeguard electrical equipment from voltage spikes. It supports two PV strings and is compatible with two maximum power point tracking (MPPT) controllers, enhancing the energy harvesting efficiency of solar installations.<br><br>Additionally, the switchgear is equipped with an AC Dehn type 2 SPD, providing similar surge protection for AC circuits. It is rated for 25A in a 3-phase configuration and includes a residual current device (RCD) type A with a 40A current rating and a 100mA trip sensitivity, offering critical protection against earth leakage currents.<br><br>The emiter, em-382_dcac, is built to maintain system integrity and protect against electrical anomalies, contributing to the longevity and safety of solar PV installations....
Senetic IE
Constructed to ensure robust protection and control for photovoltaic systems, this switchgear is designed with an ingress protection rating of IP65, signifying its ability to resist dust ingress and protect against water jets from any direction. It features a DC side equipped with a Noark 1000V type 2 Surge Protection Device (SPD), tailored to safeguard a single photovoltaic string and one Maximum Power Point Tracking (MPPT) input from power surges.<br><br>On the alternating current (AC) side, the unit includes a Noark type 2 SPD, which is engineered to provide surge protection in AC applications. The AC circuit is rated for 16A and is suitable for three-phase connections. This configuration ensures that both the DC and AC components of the photovoltaic system are shielded from transient overvoltage, thereby enhancing the overall safety and longevity of the system.<br><br>The emiter, em-40n_dcac, denotes the model of this switchgear, which is designed to seamlessly integrate into photovoltaic installations. Its construction adheres to stringent quality standards, ensuring that it performs its protective functions effectively while maintaining compatibility with the designated electrical infrastructure....
Senetic IE