Crafted to ensure safety and efficiency in electrical circuits, the unit features an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. This high level of protection makes it suitable for use in environments where exposure to dust and moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 1+2, the switchgear provides robust defense against transient overvoltage, safeguarding electrical equipment from lightning strikes and power surges. The off overcurrent capability is rated at 50A for 3-phase systems, ensuring the switchgear can handle high current scenarios without compromise.<br><br>Additionally, the inclusion of a Residual Current Device (RCD) of type A with a rating of 63A/300mA offers protection against earth fault currents, reducing the risk of electric shock and fire caused by ground faults. The EM-316N_AC model is designed to deliver a combination of protection features that contribute to the safe operation of electrical installations....
Senetic IE
Constructed to ensure robust protection and control for AC power circuits, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a surge protection device (SPD) of Noark type 1+2, offering defense against transient overvoltages and ensuring the safety of electrical equipment.<br><br>The switchgear features an off overcurrent capability of 20A across three phases, providing a safeguard against excessive current that could potentially cause damage or pose a fire risk. Additionally, it includes a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is adept at detecting AC sinusoidal waveforms as well as pulsating DC earth leakage currents, thereby enhancing the protection against electric shock and preventing electrical fire hazards.<br><br>The unit is identified by the model em-307n_ac, which signifies its specific configuration and capabilities within the emiter product range. Its construction and features are tailored to ensure consistent performance in various industrial and commercial settings where electrical safety and circuit integrity are paramount....
Senetic IE
Crafted to ensure safety and efficiency in electrical circuits, the described AC switchgear is a robust solution for managing power distribution. Encased in an IP65-rated enclosure, it offers protection against dust ingress and low-pressure water jets from any direction, making it suitable for a variety of challenging environments.<br><br>The unit comes equipped with a surge protection device (SPD) of Noark type 1+2, designed to shield electrical equipment from voltage spikes. This feature is essential for areas prone to lightning strikes or power surges, as it helps to prevent damage to connected devices.<br><br>With an off overcurrent capability of 25A across three phases, the switchgear is capable of interrupting power flow to prevent circuit damage or fire hazards due to excessive current. Additionally, it includes a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is sensitive to pulsating DC fault currents, enhancing the safety of the installation by promptly disconnecting the circuit in the event of a ground fault.<br><br>The model EM-308N_AC signifies the specific configuration of this switchgear, ensuring compatibility and ease of integration into electrical systems requiring precise specifications....
Senetic IE
Constructed to ensure robust protection for AC power systems, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to water jets from any direction. This high level of protection makes it suitable for a variety of challenging environments where exposure to particulate matter and moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 1+2, the switchgear is designed to safeguard electrical equipment from voltage spikes. The inclusion of both Type 1 and Type 2 protection means it can handle both direct and indirect lightning strikes and other transient surges, providing comprehensive defense against a wide range of power disturbances.<br><br>The off overcurrent feature is rated at 20A and is three-phase, ensuring that the switchgear can effectively disconnect circuits in the event of an overcurrent situation, thereby preventing potential damage to the system.<br><br>The emiter, EM-353N_AC, denotes the specific model within the product line, indicating its unique configuration and capabilities as part of the manufacturer's offering....
Senetic IE
Constructed to provide robust protection for photovoltaic systems, the IP65-rated DC switchgear is equipped with Noark 1000V DC surge arresters of type 1+2, ensuring safeguarding against transient overvoltage. This unit is designed to handle up to five photovoltaic strings and is compatible with five maximum power point tracking (MPPT) controllers, optimizing the energy conversion efficiency for each PV string.<br><br>The enclosure of the switchgear meets the IP65 standard, signifying a high level of protection against dust ingress and low-pressure water jets from any direction, making it suitable for challenging environmental conditions. The inclusion of Noark 1000V DC surge arresters provides a two-tiered defense mechanism, combining the immediate response of type 1 arresters with the precision protection of type 2 devices.<br><br>Each channel within the switchgear is dedicated to a single PV string, ensuring individualized protection and management. The EM-317N_DC model number identifies this specific configuration of DC switchgear, which adheres to stringent safety and performance standards. Its robust construction and advanced protective features make it a valuable component in maintaining the integrity and performance of solar energy systems....
Senetic IE
Constructed to ensure robust protection and control for photovoltaic systems, the unit features an IP65-rated enclosure, providing a high level of protection against dust and water ingress, making it suitable for a variety of challenging environmental conditions. The switchgear comes equipped with a DC side surge protection device (SPD) from Dehn, rated at 1000V type 2, designed to safeguard against transient over-voltage, thereby extending the longevity of the connected equipment.<br><br>The system is capable of handling a single photovoltaic string and is compatible with one MPPT (Maximum Power Point Tracking) controller, optimizing the conversion efficiency of the PV array. On the AC side, the switchgear includes a Dehn type 2 SPD, which serves to protect the alternating current circuits from surge events, ensuring stable and secure operation.<br><br>With a 16A 1-phase AC circuit breaker integrated into the design, the switchgear provides overcurrent protection, enhancing the safety of the electrical system. The emiter, em-215_dcac, is engineered to facilitate streamlined installation and maintenance, offering a dependable solution for managing and protecting solar energy systems....
Senetic IE
Constructed to ensure robust protection for AC power circuits, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a Surge Protection Device (SPD) of Dehn type 2, offering safeguarding against transient overvoltages and ensuring the longevity of connected electrical systems.<br><br>The switchgear features an off overcurrent capability of 20A in a single-phase (1-F) configuration, providing a secure mechanism to interrupt current flow in the event of an overload or short circuit, thereby protecting the circuitry from damage. Additionally, it is equipped with a Residual Current Device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC earth leakage currents, enhancing the safety of the installation by reducing the risk of electric shock and fire caused by earth faults.<br><br>The unit is identified by the emiter code EM-265_AC, which is indicative of its specifications and manufacturer's product line. Its robust construction and integrated protective features make it suitable for a wide range of applications where electrical safety and equipment integrity are paramount....
Senetic IE
Constructed to ensure robust protection and control for AC power circuits, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a surge protection device (SPD) of the AC Dehn type 2, offering defense against transient overvoltages and ensuring the safety of electrical equipment.<br><br>The switchgear features an off overcurrent capability of 16A in a single-phase (1-F) configuration, providing a safeguard against excessive current that could potentially cause damage or pose a fire risk. Additionally, it is equipped with a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating direct currents, thereby preventing electric shock and further enhancing user safety.<br><br>The unit's compact design allows for efficient use of space while maintaining accessibility for maintenance and monitoring. The inclusion of the emiter EM-264_AC ensures compatibility with a range of applications, making it suitable for various residential, commercial, and industrial environments where electrical safety and circuit protection are paramount....
Senetic IE