Crafted to ensure safety and efficiency in electrical circuits, the described AC switchgear is a robust solution for managing power distribution. Encased in an IP65-rated enclosure, it offers protection against dust ingress and low-pressure water jets from any direction, making it suitable for a variety of challenging environments.<br><br>The unit comes equipped with a surge protection device (SPD) of Noark type 1+2, designed to shield electrical equipment from voltage spikes. This feature is essential for areas prone to lightning strikes or power surges, as it helps to prevent damage to connected devices.<br><br>With an off overcurrent capability of 25A across three phases, the switchgear is capable of interrupting power flow to prevent circuit damage or fire hazards due to excessive current. Additionally, it includes a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is sensitive to pulsating DC fault currents, enhancing the safety of the installation by promptly disconnecting the circuit in the event of a ground fault.<br><br>The model EM-308N_AC signifies the specific configuration of this switchgear, ensuring compatibility and ease of integration into electrical systems requiring precise specifications....
Senetic IE
Constructed to ensure robust protection for AC power systems, the unit features an ingress protection rating of IP65, signifying its dust-tight design and resistance to water jets from any direction. This high level of protection makes it suitable for a variety of challenging environments where exposure to particulate matter and moisture is a concern.<br><br>Equipped with a Surge Protection Device (SPD) of Noark type 1+2, the switchgear is designed to safeguard electrical equipment from voltage spikes. The inclusion of both Type 1 and Type 2 protection means it can handle both direct and indirect lightning strikes and other transient surges, providing comprehensive defense against a wide range of power disturbances.<br><br>The off overcurrent feature is rated at 20A and is three-phase, ensuring that the switchgear can effectively disconnect circuits in the event of an overcurrent situation, thereby preventing potential damage to the system.<br><br>The emiter, EM-353N_AC, denotes the specific model within the product line, indicating its unique configuration and capabilities as part of the manufacturer's offering....
Senetic IE
Constructed to ensure robust protection and control for AC power circuits, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a surge protection device (SPD) of Noark type 1+2, offering defense against transient overvoltages and ensuring the safety of electrical equipment.<br><br>The switchgear features an off overcurrent capability of 32A across a three-phase system (3-F), effectively safeguarding circuits from excessive current that could cause damage or pose a fire risk. Additionally, it is equipped with a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC fault currents, thereby minimizing the risk of electric shock and preventing electrical fire hazards.<br><br>The product is identified by the emiter code EM-357N_AC, which is unique to this specific model of switchgear, ensuring easy identification and reference for installation and maintenance purposes. Its robust construction and integrated protective features make it suitable for a wide range of industrial and commercial electrical applications....
Senetic IE
Constructed to ensure robust protection and control for photovoltaic systems, this switchgear is designed with an ingress protection rating of IP65, signifying its ability to resist dust ingress and protect against water jets from any direction. It features a DC side equipped with a Noark 1000V type 2 Surge Protection Device (SPD), tailored to safeguard a single photovoltaic string and one Maximum Power Point Tracking (MPPT) input from power surges.<br><br>On the alternating current (AC) side, the unit includes a Noark type 2 SPD, which is engineered to provide surge protection in AC applications. The AC circuit is rated for 16A and is suitable for three-phase connections. This configuration ensures that both the DC and AC components of the photovoltaic system are shielded from transient overvoltage, thereby enhancing the overall safety and longevity of the system.<br><br>The emiter, em-40n_dcac, denotes the model of this switchgear, which is designed to seamlessly integrate into photovoltaic installations. Its construction adheres to stringent quality standards, ensuring that it performs its protective functions effectively while maintaining compatibility with the designated electrical infrastructure....
Senetic IE
Constructed to ensure robust protection for AC power systems, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a Surge Protection Device (SPD) of the Dehn type 2 category, offering defense against transient overvoltages and ensuring the safety of connected electrical equipment.<br><br>The unit is equipped with an off overcurrent feature rated at 50A for a three-phase system, providing a safeguard against current surges that could potentially cause damage or pose a fire risk. This feature is essential for maintaining the integrity of the electrical system and preventing disruptions due to overcurrent incidents.<br><br>The switchgear is compatible with the emiter EM-212_AC series, ensuring seamless integration with existing components from the same line. Its robust construction and protective features make it suitable for a wide range of applications where electrical system security is paramount. The device's specifications and capabilities are tailored to meet the demands of environments requiring stringent control over electrical supply and protection....
Senetic IE
The EM-214_DCAC switchgear is designed to offer a secure and efficient interface between direct current (DC) and alternating current (AC) systems in solar power applications. It features an ingress protection rating of IP65, ensuring a high level of protection against dust and water, making it suitable for challenging environmental conditions.<br><br>Equipped with a Surge Protection Device (SPD) DC Dehn 1000V of type 1+2, the unit provides robust protection against voltage surges on the DC side, safeguarding photovoltaic (PV) components. It supports two PV strings and is compatible with systems utilizing two Maximum Power Point Tracking (MPPT) controllers, enhancing the solar installation's energy conversion efficiency.<br><br>Additionally, the switchgear includes an SPD AC Dehn type 1+2 on the AC side, which offers similar surge protection to the connected electrical infrastructure. The AC circuit is rated for 20A and is designed to handle three-phase power, accommodating the needs of more complex and demanding installations.<br><br>The EM-214_DCAC switchgear is engineered to facilitate safe and stable operation of solar power systems, contributing to the longevity and performance of the installation....
Senetic IE
Constructed to ensure robust protection for AC power distribution systems, this switchgear is designed with an ingress protection rating of IP65, signifying its dust-tight construction and resistance to water jets from any direction. It incorporates a surge protection device (SPD) of AC Dehn type 2, which is engineered to safeguard electrical equipment from voltage spikes, thereby extending the lifespan of connected devices.<br><br>The switchgear features an off overcurrent capability of 16A for three-phase (3-F) systems, providing a safeguard against excessive current that could cause damage to the circuit or connected equipment. Additionally, it is equipped with a residual current device (RCD) of type A with a rated sensitivity of 40A/300mA. This RCD is specifically designed to detect and interrupt AC sinusoidal waveforms and pulsating DC fault currents, offering enhanced protection against electric shock and fire hazards caused by earth faults.<br><br>The unit is identified by the emiter code EM-268_AC, which is indicative of its specifications and manufacturer's product line. This switchgear is suitable for a variety of applications where safety and durability are paramount....
Senetic IE
Constructed to ensure robust protection and efficient energy management for solar power systems, the unit features an IP65-rated enclosure, safeguarding against dust ingress and water jets from any direction. The switchgear is equipped with a Noark 1000V type 2 Surge Protection Device (SPD) on the DC side, designed to shield photovoltaic (PV) installations from transient overvoltage, thereby extending the lifespan of the system.<br><br>The switchgear accommodates three PV strings and is compatible with three Maximum Power Point Tracking (MPPT) controllers, optimizing the conversion of solar energy under various sunlight conditions. On the alternating current (AC) side, it includes a Noark type 2 SPD, which provides additional surge protection, and a 40A 3-phase circuit breaker that facilitates safe and controlled distribution of electrical power.<br><br>The emiter EM-149N_DCAC model is engineered for seamless integration into solar energy systems, offering a comprehensive solution for electrical safety and performance optimization. Its robust construction and advanced protective features make it a valuable component in maintaining the integrity and efficiency of solar power operations....
Senetic IE