The foil provides a continuous earth layer within the floor construction whilst diffusing the heat away from the heating cable. This system can be used to safely heat under laminate, carpet, vinyl and other resilient floors, when combined with Insulated Underlay and Dual Overlay.
eBay
The desired temperature can be set with the easily hand-adjustable knob. With a Kvs value of 3.4 for the VTA 372 and 1.6 for the VTA 322, The ESBE blending valves supplied with this kit are capable of managing underfloor heating systems up to 230m2, which is more than enough for even a 12-port manifold.
eBay
The UFH1 Pumped Single Room kit allows a speedy and cost effective solution to putting underfloor heating in a room up to 20m². An ‘A’ rated EuP specification modulating pump takes care of pumping the water around the circuit (up to 100m).
eBay
Pre-Assembled underfloor Heating Manifold in stainless steel mounted on an adjustable installation bracket. We do endeavour to dispatch orders received later than this where possible. Stainless Steel Underfloor Heating Manifold.
eBay
Box of 300 pipe clips for underfloor heating systems. These clips feature small pegs that act as a locking mechanism when installed, ensuring the pipe is securely fitted to the area desired. Manufactured in Poland. Made to fit DN20 pipe.
eBay
ProWarm CableSafe Warranty. ProWarm Electric Underfloor Heating Mat (100w). ProWarm 100w underfloor heating mats provide a very economical heating solution for large floor areas. They are NOT suitable as a primary heating source, but are ideal as a secondary source for large tiled areas.
eBay
The weight of the film used.
eBay
Electric Underfloor Heating Cable Middle Repair Kit This repair kit is designed for repairing the heating cable that is damaged during installation of the heating cable or mat. The kit includes jumper wires to bridge the heating element after the damaged section is removed. Simple crimps that replace the damaged section of your heating cable. One kit needed per damaged section. The heat mat/cable MUST then be tested. The heating cable resistance should be compared to the value within the instruction manual. The insulation resistance MUST also be measured and should be greater than 500 M Ohms. As with all electrical projects governed by Part P regulations, all mains electrical connections must be undertaken by a certified electrician.
eBay