L'espace SPACER CHAMBER FOR INHALER INHALER | | Indications | Sealing chamber with valve that helps use metered dose inhalers (MDI). It improves the effectiveness of drug delivery to the lungs by reducing side effects. | | Dosage and Directions for Use | 1 - Before use, carefully examine the product to ensure it is assembled correctly and that there are no foreign objects or missing components. Remove any foreign objects before use. | 2 - Before use, read the instructions provided with the MDI. Remove the lid from the MDI; | 3 - Insert the MDI into the bottom; | 4 - Apply the mask to the face and ensure there is una complete adhesion between the mask and face. To prevent crushing of the mask, hold the device in modo Hold both the mask and the chamber with your hand; | 5- Press the MDI and inhale slowly through your mouth. Keep the mask firmly pressed against your face for at least 5 breaths after pressing the inhaler. During inhalation, air enters through the openings at the bottom, facilitating the inhalation of the nebulized solution. The exhaled air exits through the exhalation valve; | 6- Wait 30 seconds before administering another dose of medication (repeat steps 4-5), or as directed by your doctor. Administer only one puff of medication at a time and follow your doctor's dosing instructions. | | Characteristics | The product does not contain latex. | | Cleaning instructions | If the device is always used by the same person persona clean it as indicated. If the device is used by more than one person, it is necessary, after each use, in addition to cleaning, also una sterilization in an autoclave at 121°C for 15 minutes. The device can essere sterilized without compromising its functional characteristics up to 20 times, after which it must be replaced. If deemed appropriate, for una For thorough cleaning, you can boil the device or wash it in the dishwasher. | A - the product should essere clean following the instructions below before first use and then at least una Once a week: remove the bottom and mask; | B - Soak the parts for 15 minutes in warm water with a neutral detergent and disinfectant. Shake gently; | C - Rinse in clean water; | D - Shake to remove excess water as shown. Do not use dry cloths to dry the device parts. Make sure the parts are dry before reassembling them; | E - Replace the bottom and mask when the parts are completely dry and ready for use. Center the alignment arrow on the back component with the alignment notch on the body as shown. | | Warnings | Replace the product if a component is damaged. Some components may be slightly damaged due to their size. essere swallowed by children. Do not leave these components unattended. Adult supervision is always required. Do not disassemble the product beyond the instructions for cleaning. If in doubt about the use of the product, consult your doctor or pharmacist. Clean the product only as directed in these instructions to ensure its effective function...
OneBioShop IE
Vaillant Ecotec Plus. VAILLANT ecoTEC plus 824 (2005-2005). VAILLANT ecoTEC plus 824 (2005-2010). VAILLANT ecoTEC plus 831 (2005-2005). VAILLANT ecoTEC plus 831 (2005-2010). VAILLANT ecoTEC plus 837 (2006-2010).
eBay
Reviews | L'espace SPACER CHAMBER FOR INHALER Indications | Sealing chamber with valve that helps use metered dose inhalers (MDIs). It improves the effectiveness of drug delivery to the lungs, reducing side effects. | | Dosage and Directions for Use | 1 - Before use, carefully examine the product to ensure it is assembled correctly and that there are no foreign objects or missing components. Remove any foreign objects before use; | 2 - Before use, read the instructions provided with the MDI. Remove the cap from the MDI; | 3 - Insert the MDI into the bottom; | 4 - Place the mouthpiece in your mouth and hold it between your lips; | 5 - Press the MDI and inhale slowly through your mouth. Keep the mouthpiece in your mouth with your lips tightly closed for at least 5 breaths after pressing the inhaler. During inhalation, air enters through the openings on the bottom, facilitating inhalation of the nebulized product. The exhaled air exits through the exhalation valve; | 6 - wait 30 seconds before administering another dose of medication (repeat steps 4-5), or as directed by your doctor. Administer only one puff of medication at a time and follow your doctor's dosage instructions. | | Characteristics | The product does not contain latex. | | Cleaning instructions | if the device is always used by the same person persona clean it as indicated. If the device is used by more than one person, it is necessary, after each use, in addition to cleaning, also una sterilization in an autoclave at 121°C for 15 minutes. The device can essere sterilized without compromising its functional characteristics up to 20 times, after which it must be replaced. If deemed appropriate, for una For thorough cleaning, you can boil the device or wash it in the dishwasher. | A - the product should essere clean following the instructions below before first use and then at least una Once a week: remove the bottom and mask; | B - Soak the parts for 15 minutes in warm water with a neutral detergent and disinfectant. Shake gently; | C - Rinse in clean water; | D - Shake to remove excess water as shown. Do not use dry cloths to dry the device parts. Make sure the parts are dry before reassembling them; | E - Replace the bottom and mask when the parts are completely dry and ready for use. Center the alignment arrow on the back component with the alignment notch on the body as shown. | | Warnings | Replace the product if a component is damaged. Some components may be slightly damaged due to their size. essere swallowed by children. Do not leave these components unattended. Adult supervision is always required. Do not disassemble the product beyond the instructions for cleaning. If you have any doubts about using the product, consult your doctor or pharmacist. Clean the product only as directed in these instructions to ensure its effective functioning. | | Storage | When not in use, store the product in a clean container. | Replace the product after 24 months of cont...
OneBioShop IE
ECOTEC PLUS 824 VUW 246/3-5 2005-2012 - 47-044-31. ECOTEC PLUS 824 VUW 246/3-5 R1 2005-2011 - 47-044-31 R1. ECOTEC PLUS 824 VUW 246/3-5 R3 2011-2012 - 47-044-31 R2. ECOTEC PLUS 831 VUW 316/3-5 2005-2013 - 47-044-32.
eBay
Alvea Adult Mask Ampoule - Class IIa Medical Device (Directive 93/42/EEC) - Non-sterile | Double Venturi Ampoule for una effective therapy of vie lower areas. | Specific nebulizer bulb for treating the vie lower airways. Alvea is breath-enhanced as it is equipped with inhalation and exhalation valves that limit the dispersion of the drug into the environment. The inhalation valve also speeds up nebulization during inhalation and therefore the duration of the total therapy. Alvea can essere used by adults and children thanks to the 3 different terminals Buccal mask: for cooperative patients;| Mask pediatrica : for pediatric patients up to 5 years old; Mouthpiece. The masks are made of soft, medical-grade silicone and are latex- and phthalate-free. Fully sterilizable. Reduced drug dispersion into the environment. With inhalation and exhalation valve. Technical specifications: MMAD: 1.7 mcm| Minimum nebulization: 0.3 ml/min. | Format: Pack of 1 piece.
OneBioShop IE
Vaillant Ecotec Plus. VAILLANT ecoTEC plus 824 (2005-2005). VAILLANT ecoTEC plus 824 (2005-2010). VAILLANT ecoTEC plus 831 (2005-2005). VAILLANT ecoTEC plus 831 (2005-2010). VAILLANT ecoTEC plus 837 (2006-2010).
eBay
L'espace SPACER CHAMBER FOR INHALER INHALER | | Indications | Sealing chamber with valve that helps use metered dose inhalers (MDI). It improves the effectiveness of drug delivery to the lungs by reducing side effects. | | Dosage and Directions for Use | 1 - Before use, carefully examine the product to ensure it is assembled correctly and that there are no foreign objects or missing components. Remove any foreign objects before use. | 2 - Before use, read the instructions provided with the MDI. Remove the lid from the MDI; | 3 - Insert the MDI into the bottom; | 4 - Apply the mask to the face and ensure there is una complete adhesion between the mask and face. To prevent crushing of the mask, hold the device in modo Hold both the mask and the chamber with your hand; | 5- Press the MDI and inhale slowly through your mouth. Keep the mask firmly pressed against your face for at least 5 breaths after pressing the inhaler. During inhalation, air enters through the openings at the bottom, facilitating the inhalation of the nebulized solution. The exhaled air exits through the exhalation valve; | 6- Wait 30 seconds before administering another dose of medication (repeat steps 4-5), or as directed by your doctor. Administer only one puff of medication at a time and follow your doctor's dosing instructions. | | Characteristics | The product does not contain latex. | | Cleaning instructions | If the device is always used by the same person persona clean it as indicated. If the device is used by more than one person, it is necessary, after each use, in addition to cleaning, also una sterilization in an autoclave at 121°C for 15 minutes. The device can essere sterilized without compromising its functional characteristics up to 20 times, after which it must be replaced. If deemed appropriate, for una For thorough cleaning, you can boil the device or wash it in the dishwasher. | A - the product should essere clean following the instructions below before first use and then at least una Once a week: remove the bottom and mask; | B - Soak the parts for 15 minutes in warm water with a neutral detergent and disinfectant. Shake gently; | C - Rinse in clean water; | D - Shake to remove excess water as shown. Do not use dry cloths to dry the device parts. Make sure the parts are dry before reassembling them; | E - Replace the bottom and mask when the parts are completely dry and ready for use. Center the alignment arrow on the back component with the alignment notch on the body as shown. | | Warnings | Replace the product if a component is damaged. Some components may be slightly damaged due to their size. essere swallowed by children. Do not leave these components unattended. Adult supervision is always required. Do not disassemble the product beyond the instructions for cleaning. If in doubt about the use of the product, consult your doctor or pharmacist. Clean the product only as directed in these instructions to ensure its effective function...
OneBioShop IE
PART NUMBER: 0020020015. Vaillant ecoTEC PRO 24 R1. Vaillant ecoTEC PRO 28 R1. Vaillant ecoTEC PRO 24. Vaillant ecoTEC PRO 28. Vaillant VUW 246/5-3 R1 (2012-CURR). Vaillant VUW 286/5-3 R1 (2012-CURR).
eBay
L'espace SPACER CHAMBER FOR INHALER INHALER | | Indications | Sealing chamber with valve that helps use metered dose inhalers (MDI). It improves the effectiveness of drug delivery to the lungs by reducing side effects. | | Dosage and Directions for Use | 1 - Before use, carefully examine the product to ensure it is assembled correctly and that there are no foreign objects or missing components. Remove any foreign objects before use. | 2 - Before use, read the instructions provided with the MDI. Remove the lid from the MDI; | 3 - Insert the MDI into the bottom; | 4 - Apply the mask to the face and ensure there is una complete adhesion between the mask and face. To prevent crushing of the mask, hold the device in modo Hold both the mask and the chamber with your hand; | 5- Press the MDI and inhale slowly through your mouth. Keep the mask firmly pressed against your face for at least 5 breaths after pressing the inhaler. During inhalation, air enters through the openings at the bottom, facilitating the inhalation of the nebulized solution. The exhaled air exits through the exhalation valve; | 6- Wait 30 seconds before administering another dose of medication (repeat steps 4-5), or as directed by your doctor. Administer only one puff of medication at a time and follow your doctor's dosing instructions. | | Characteristics | The product does not contain latex. | | Cleaning instructions | If the device is always used by the same person persona clean it as indicated. If the device is used by more than one person, it is necessary, after each use, in addition to cleaning, also una sterilization in an autoclave at 121°C for 15 minutes. The device can essere sterilized without compromising its functional characteristics up to 20 times, after which it must be replaced. If deemed appropriate, for una For thorough cleaning, you can boil the device or wash it in the dishwasher. | A - the product should essere clean following the instructions below before first use and then at least una Once a week: remove the bottom and mask; | B - Soak the parts for 15 minutes in warm water with a neutral detergent and disinfectant. Shake gently; | C - Rinse in clean water; | D - Shake to remove excess water as shown. Do not use dry cloths to dry the device parts. Make sure the parts are dry before reassembling them; | E - Replace the bottom and mask when the parts are completely dry and ready for use. Center the alignment arrow on the back component with the alignment notch on the body as shown. | | Warnings | Replace the product if a component is damaged. Some components may be slightly damaged due to their size. essere swallowed by children. Do not leave these components unattended. Adult supervision is always required. Do not disassemble the product beyond the instructions for cleaning. If in doubt about the use of the product, consult your doctor or pharmacist. Clean the product only as directed in these instructions to ensure its effective function...
OneBioShop IE
PART NUMBER: 0020020015 178978 0020132682. VAILLANT ECOTEC. Once you have fitted this kit in the valve. In the future you only have to change the gland nut (DV.426) to repair the valve.
eBay
Alvea Ampoule Family Air Liquide Medical Mask + Mouthpiece Class IIa Medical Device (Directive 93/42/EEC). Non-sterile | Double Venturi ampoule for una effective therapy of vie lower areas. | Specific nebulizer bulb for treating the vie lower airways. Alvea is breath-enhanced as it is equipped with inhalation and exhalation valves that limit the dispersion of the drug into the environment. The inhalation valve also speeds up nebulization during inhalation and therefore the duration of the total therapy. Alvea can essere used by adults and children thanks to the 3 different terminals: | Buccal mask: for cooperative patients; | Mask pediatrica: for pediatric patients up to 5 years old; Mouthpiece. The masks are made of soft, medical-grade silicone and are latex- and phthalate-free. Fully sterilizable. Reduced drug dispersion into the environment. With inhalation and exhalation valve. Technical specifications: MMAD: 1.7 mcm| Minimum nebulization: 0.3 ml/min | Format: Pack of 1 piece.
OneBioShop IE
VAILLANT ECOTEC PLUS 824. VAILLANT ECOTEC PLUS 825. VAILLANT ECOTEC PLUS 831. VAILLANT ECOTEC PLUS 832. VAILLANT ECOTEC PLUS 835.
eBay
Alvea Junior Mask Ampoule Medical Device Class IIa Device (Directive 93/42/EEC) - Non-sterile | Double Venturi Ampoule for una effective therapy of vie lower areas. | Specific nebulizer bulb for treating the vie lower airways. Alvea is breath-enhanced as it is equipped with inhalation and exhalation valves that limit the dispersion of the drug into the environment. The inhalation valve also speeds up nebulization during inhalation and therefore the duration of the total therapy. Alvea can essere used by adults and children thanks to the 3 different terminals Buccal mask: for cooperative patients;| Mask pediatrica: for pediatric patients up to 5 years old; Mouthpiece. The masks are made of soft, medical-grade silicone and are latex- and phthalate-free. Fully sterilizable. Reduced drug dispersion into the environment. With inhalation and exhalation valve. Technical specifications: MMAD: 1.7 mcm| Minimum nebulization: 0.3 ml/min | Format: Pack of 1 piece.
OneBioShop IE
ECOTEC PLUS 824 VUW 246/3-5 2005-2012 - 47-044-31. ECOTEC PLUS 824 VUW 246/3-5 R1 2005-2011 - 47-044-31 R1. ECOTEC PLUS 824 VUW 246/3-5 R3 2011-2012 - 47-044-31 R2. ECOTEC PLUS 831 VUW 316/3-5 2005-2013 - 47-044-32.
eBay
Reviews | PERFECTA KIT WITH MEFAR2000 AMPULA Class IIa medical device. | Kit consisting of: a Mefar2000 ampoule (lower body, pisper, upper body) and una Volumetric mask with connector and exhaust valve. | The Mefar2000 nebulizer bulb with volumetric mask can be used to treat bronchial asthma, chronic bronchitis, pulmonary emphysema, cystic fibrosis, and other respiratory diseases through the administration of medications in aerosol form. The bulb is incompatible with solutions containing menthol (eucalyptus, essential oils). | | Directions for use | To avoid the risk of microbial contamination, the components must be essere cleaned and disinfected after each therapy and before use, carefully following the instructions listed. | Cleaning | The Mefar2000 ampoule and the volumetric mask with connector must essere Wash with hot water using a little non-abrasive detergent and rinse under running water. Once all the parts have been cleaned, they can essere dry with a soft cloth or a hair dryer then they can essere answers. | Disinfection | The Mefar2000 ampoule and the volumetric mask with connector, after essere washed states can essere immersed in una cold disinfectant solution (such as a 5.25% sodium hypochlorite solution), following the manufacturer's instructions (be careful to read the warnings and ensure that the disinfectant solution is compatible with the material the kit is made of). The kit components, except for the tube end, can be disinfected by boiling them in water for 10 minutes. | Sterilization | Sterilization is possible for the kit components, except for the tube end, in an autoclave at 121°C for a tempo of 15 min. (preferably not to exceed 30 min.). | | Technical Specifications | Minimum supply pressure: 1.5 bar (150 kPa) Maximum supply pressure: 3 bar (300 kPa) Air flow at minimum pressure: 7 l/min Air flow at maximum pressure: 15 l/min Drug delivery at minimum pressure: 0.20 ml/min Drug delivery at maximum pressure: 0.45 ml/min MMAD at minimum pressure: 2.5 µm MMAD at maximum pressure: 1.9 µm Maximum capacity: 8 ml. | | Components | Lower body, pisper, upper body: Polycarbonate. | Mask and exhaust valve: Silicone. | Connection: Polycarbonate. | | Format | 1 piece. | | Code 471149
OneBioShop IE
Vaillant Ecotec Plus. VAILLANT ecoTEC plus 824 (2005-2005). VAILLANT ecoTEC plus 824 (2005-2010). VAILLANT ecoTEC plus 831 (2005-2005). VAILLANT ecoTEC plus 831 (2005-2010). VAILLANT ecoTEC plus 837 (2006-2010).
eBay